  |
|
IBM / LEXMARK
SELECTRIC PARTS
Selectric Motor Belt - Stock No. 20-03
for all Selectric Models
We only supply replacement tilt and rotate tapes in a thicknesses of .0025". The .0025" tapes are the same as the original IBM tapes (flexible) To order the .0025" thick tapes, order the Stock No. followed by the letter "A".
ROTATE TAPES FOR SELECTRICS: 
Colman Stk. No. | Thickness | Carriage | Mfr's No. |
20-14A | (.0025) | 11" | 1134811 |
20-15A | (.0025) | 13" | 1138106 |
20-16A | (.0025) | 15" | 1134817 |
TILT TAPES FOR SELECTRICS: 
For most models with gearless tilt.
Colman Stk. No. | Thickness | Carriage | Mfr's No. |
20-20 | (.004) | 11" | 1164314 |
20-21A | (.0025) | 13" | 1164318 |
20-22 | (.004) | 15" | 1164316 |
Carrier Control or Velocity Cable for Selectrics
Colman | Carriage | Cable | Replaces |
20-56 | 13" | 21-3/4" | 1141763 |
Tab Cord for I B M Selectrics:
Colman | Cord | Replaces |
20-52 | 17" | 1128378 |
20-54 | 28" | 1128380 |
C/R, B/S, Tab Cable for Selectrics:
Colman | Cable | Color | Replaces |
20-61 | 25" | Clear | 1204680 |
20-62 | 22" | Blue | 1204681 |
Color coded like the originals.
| Repair kit to rebuild Selectric cord pulley and bracket; (Mfr's #1205784). Metal parts supplied to replace broken plastic parts. Fast, easy repair takes 2 minutes and will out-last the original many times. IBM Stock No. 20-51 |
| Centrifugal Clutch Ass'y. for Selectric I, II, III. Clutch pawls are secured with retainer rings for easy replacement. (Mfr's #1164455) Stock No. 20-74 |
| Spacer (washer) for use on either side of the motor pulley on Selectric typewriters. Order multiples of 10 only. (Mfr's #1141503) Stock No. 20-1A3 |
| Torque Limiting Spring for Selectrics. Order in multiples of 4 only. (Mfr's #1123581) Stock No. 20-39 |
| Motor Shaft Bushing for Selectrics. Order in multiples of 20 only. (Mfr's #1236572) Stock No. 20-70 |
| Cycle Clutch Spring for I B M Selectrics. Order in multiples of 2 only. (Mfr’s #1141848) Stock No. 20-13 |
| Torque Limit Extension Spring for Selectric I. Order in multiples of 10 only. (Mfr’s #1141650) Stock No. 20-78 No Longer Available, sub 20-91 |
| Torque Limit Extension Spring for Selectric II & III. Order in multiples of 10 only. (Mfr’s #8168266) Stock No. 20-91 |
| Pinion Spring for carrier return on I B M Selectrics. Order in multiples of 6 only. (Mfr’s #1175243) Stock No. 20-40 |
| Carriage-Return Pinion Gear for Selectric typewriters. (Mfr's #1123574) Stock No. 20-69 |
| Tab Pinion Gear for Selectric typewriters. (Mfr’s #1123571) Stock No. 20-68 |
| Clutch wheel (single cam) for Selectric typewriters. Order in multiples of 2 only. (Mfr's #1123566) Stock No. 20-1A34 |
| Upper & Lower Case Spring for Selectrics. Order in multiples of 4 only. (Mfr’s #1132287) Stock No. 20-38 |
| Nylon hub (sleeve) for Selectric typewriters. Order in multiples of 10 only. (Mfr’s #1123579) Stock No. 20-99 |
| Felt wiper for Selectrics. Order in multiples of 10 only. (Mfr’s #1124647) Stock No. 20-1A1 |
| Tilt Ring Pin for Selectric typewriter. Order in multiples of 2 only. (Mfr's #1124190) Stock No. 20-1A18 |
| Ball Joint for gearless type tilt mechanism on Selectric typewriters. (Mfr’s #1124220) Stock No. 20-67 |
| Cardholder or card-guide for Selectric II & III. Snap-in-style, also fits Remington. Order in multiples of 2 only. (Mfr’s #1206424) Not teflon coated. Stock No. 20-11 |
| Cardholder or card-guide for early Selectrics. One style replaces both pica and elite. Order in multiples of 2 only. (Mfr's #1174354) Stock No. 20-08 |
| Carrier Indicator for Selectrics II & III. Order in multiples of 10 only. (Mfr’s #1206640) Stock No. 20-45 |
